[TRNSYS-users] TRNSYS Weather File Construction

[David BRADLEY]

Craig,

  I would try and find an hourly data file for a location that is near 
to the RETScreen location. TRNSYS reads half a dozen or so different 
weather data file syntaxes and there is a data base of Canadian weather 
in *.epw format that has a pretty extensive site list. There is a 
component in Trnsys that will generate hourly data based on monthly 
averages but not one that will do so based on daily data.

kind regards,

  David


On 12/01/2020 11:51, Craig Francis via TRNSYS-users wrote:
> Hi Everyone:
> I am new to TRNSYS and looking for a bit of help around constructing a 
> weather file readable by TRNSYS. I have some NASA weather data for a 
> site that I extracted from RETScreen, however these are daily data. Is 
> there anyway to have TRNSYS convert these to say hourly data, or data 
> consistent with the simulation steps?
> Thanks in advance.
>
> Craig
>
> *
>
> *
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20201201/0559ea43/attachment.htm>