[TRNSYS-users] Loop - How do I reconcile the end and beginning?

Jeff Thornton thornton at tess-inc.com
Thu Apr 2 15:03:14 PDT 2020


 

Nina, 

I'm not sure what you are asking. In most district loop projects we have
done, the piping network make a complete closed path. If it's a single
pipe system the loads divert from and return to the main loop. In a
two-pipe system, the flows leave from the supply pipe and return to the
return pipe which runs in parallel with the supply pipe. 

Jeff 

---
Jeff Thornton
President - TESS LLC
3 N. Pinckney Street, Suite 202, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 04/02/2020 3:33 pm, Nina Monteiro via TRNSYS-users wrote: 

> Hi there, 
> 
> I'm trying to create a district heating type of loop. I'm not sure how to reconcile the values of my loop. 
> Does anyone know how can I use the values of the previous iteration in the next one? If this is possible, how do I set initial values? 
> 
> Many thanks, 
> Nina Monteiro 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200402/f4f8cb67/attachment.htm>


More information about the TRNSYS-users mailing list