[TRNSYS-users] Boundary temperatures settings

[Alexander Schneider]

Hallo,

I created a new 3D multizone Building project. There are this settings at the beginning where you can upload the idf file and weather data. Also it is possible there to define the boundary temparature. After I worked on the Project I would like to change the boundary temperature, how can I do it afterwards after I worked on the Project. I can not find this setting. I am also sending you a picture to describe what I mean. 

I hope you can help me.

Best regards
Alexander Schneider


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200420/e4f553e6/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Boundary temperatures of surfaces.JPG
Type: image/jpeg
Size: 123180 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200420/e4f553e6/attachment-0001.jpe>