[TRNSYS-users] TRNSYS-users Digest, Vol 184, Issue 8

[asmin aryal]

Hello,
For me I connect the instantaneous value of function over timestep of type
14 h to the cooling coil on/off control signal. I think you need to
connect, "instantaneous value of forcing function over timestep" of
"forcing function"(type 14h)   to your desired module's on/off control
signal to turn it on and off as per your requirement.
[image: image.png]
Regards,
Ashmin Aryal

On Wed, Apr 8, 2020 at 5:55 AM <trnsys-users-request at lists.onebuilding.org>
wrote:

> Send TRNSYS-users mailing list submissions to
>         trnsys-users at lists.onebuilding.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
> or, via email, send a message with subject or body 'help' to
>         trnsys-users-request at lists.onebuilding.org
>
> You can reach the person managing the list at
>         trnsys-users-owner at lists.onebuilding.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
> Today's Topics:
>
>    1. About scheduling (H?seyin G?nhan ?zcan)
>
>
>
> ---------- Forwarded message ----------
> From: "Hüseyin Günhan Özcan" <huseyin.ozcan at yasar.edu.tr>
> To: "TRNSYS users mailing list at OneBuilding.org" <
> trnsys-users at lists.onebuilding.org>
> Cc:
> Bcc:
> Date: Tue, 7 Apr 2020 17:42:22 +0000
> Subject: [TRNSYS-users] About scheduling
>
> Hello everyone,
>
>
>
> I hope you are all doing well and healthy.
>
> I am modeling a PV powered air conditioner unit with back up system. My
> model cuurently operates. However, I am also planing to switch off the air
> conditioner between 18:00 to 08:00 on weekdays and also at the weekends.
>
> I tried to use type 14 (weekdays and weekend defination) with type 41
> (whole week). But I could not find the connection for output of type 41,
> namely forcing function output for current day. I suppose that they have to
> be connected to fan control signal, mass flow rate or conditioning signals.
> But they are all connected to other models like building and termostat.
>
>
>
> Can you please help me on this issue?
>
> Best regards.
>
>
>
>
>
> *Res. Assist. Huseyin Gunhan Ozcan*
>
> *Yasar Uni. Dept. of Energ. Sys. Eng. *
>
> *[image: Adsız02]*
>
>
>
>
>
>
>
>
>
> Bu elektronik postada bulunan tum fikir ve gorusler ve ekindeki dosyalar sadece adres sahip/sahiplerine ait olup,
> Yasar Universitesi bu mesajin icerigi ile ilgili olarak hic bir hukuksal sorumlulugu kabul etmez. Eger gonderilmesi
> dusunulen kisi veya kurulus degilseniz, lutfen gonderen kisiyi derhal haberdar ediniz ve mesaji sisteminizden siliniz.
>
>
> The information contained in this e-mail and any files transmitted with it are intended solely for the use of the
> individual or entity to whom they are addressed Yasar University does not accept legal responsibility for the
> contents. If you are not the intended recipient, please immediately notify the sender and delete the message from your system.
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200408/97b3925c/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 7343 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200408/97b3925c/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 17569 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200408/97b3925c/attachment-0003.png>