[TRNSYS-users] About scheduling

[Hüseyin Günhan Özcan]

Hello everyone,

I hope you are all doing well and healthy.
I am modeling a PV powered air conditioner unit with back up system. My model cuurently operates. However, I am also planing to switch off the air conditioner between 18:00 to 08:00 on weekdays and also at the weekends.
I tried to use type 14 (weekdays and weekend defination) with type 41 (whole week). But I could not find the connection for output of type 41, namely forcing function output for current day. I suppose that they have to be connected to fan control signal, mass flow rate or conditioning signals. But they are all connected to other models like building and termostat.

Can you please help me on this issue?
Best regards.


Res. Assist. Huseyin Gunhan Ozcan
Yasar Uni. Dept. of Energ. Sys. Eng.
[Adsız02]





Bu elektronik postada bulunan tum fikir ve gorusler ve ekindeki dosyalar sadece adres sahip/sahiplerine ait olup,
Yasar Universitesi bu mesajin icerigi ile ilgili olarak hic bir hukuksal sorumlulugu kabul etmez. Eger gonderilmesi
dusunulen kisi veya kurulus degilseniz, lutfen gonderen kisiyi derhal haberdar ediniz ve mesaji sisteminizden siliniz.<br><br>
The information contained in this e-mail and any files transmitted with it are intended solely for the use of the
individual or entity to whom they are addressed Yasar University does not accept legal responsibility for the 
contents. If you are not the intended recipient, please immediately notify the sender and delete the message from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200407/5b5f60aa/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 7343 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200407/5b5f60aa/attachment.png>