[TRNSYS-users] Max. heat load calculation

[Rijvers, L.P.M.]

Dear TRNYS users,

I would like to perform a max. heat load calculation on a set of buildings.
Ideally, the aim is to automate these calculations, e.g. through the use of Python or MATLAB.
Does anyone know if this is possible? And, if so, provide me with the basic instructions?

Thanks in advance and kind regards,

Len Rijvers

[cid:image001.png at 01D4653F.FFFE2DE0]   [SBC Logo zonder tekst]
Len Rijvers
Eindhoven University of Technology
Mechanical Engineering, PDEng trainee Smart Buildings and Cities Program
Gemini-Zuid 2.119
T: +31 647 59 29 16

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190904/c886ba3a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 6522 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190904/c886ba3a/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 3038 bytes
Desc: image002.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190904/c886ba3a/attachment-0001.png>