[TRNSYS-users] TRNSYS Model for Radiator

[Tahir, M.H.T. (Haseeb)]

Dear all,

I am looking for radiator model in TRNSYS which includes the thermal mass and reflects the transient behaviour during the charging process.
Transient radiator model should be able to store the heat (in form of water inside the radiator tubes) that will be utilized for the defrosting cycle of the heat pump (whenever it will require).

I have already looked into TESS Type 1231. It doesn't include this transient behavior. Do you know about any other Radiator type/mathematical model which is based on transient model?

I am looking forward to hear from you and thanks in advance!
Have a good day!

Kind regards,





Ir. M.H.T. (Haseeb) Tahir
Junior Scientist Innovator
Building Performance and Systems

T
M +31611074730
E Haseeb.tahir at tno.nl<mailto:Haseeb.tahir at tno.nl>

Location<http://www.tno.nl/locations/DTL> Delft



[cid:image001.gif at 01D4DE72.1319C140]<http://www.tno.nl/>

This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. TNO accepts no liability for the content of this e-mail, for the manner in which you use it and for damage of any kind resulting from the risks inherent to the electronic transmission of messages.




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190319/fb4a30eb/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 2396 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190319/fb4a30eb/attachment.gif>