[TRNSYS-users] (no subject)

[David BRADLEY]

I am not entirely I understand your question. The temperature of liquid 
coming out of the tank will depend on where you have specified that 
outlet to be located. If the outlet is located physically at the top of 
the tank then the leaving liquid temperature should be the temperature 
of the liquid in the top node of the tank (not the average tank 
temperature).

If I misunderstood your question, my apologies. Could you please give me 
a bit more detail in that case?

kind regards,

  David


On 03/19/2019 05:03, berkane ahlem via TRNSYS-users wrote:
>
> Hello sirs,
> I simulate a solar cycle coupled with  GHP  for space heating and DHW. 
> in my stratigy of control if the average temperature of DHW exceeds 
> the set point the pump citculation transfers the excess heat of DHW 
> tank type (4b) to the borehole .
> my question is:  can i use average tank temperature as output and i 
> assumed  constant flow rate  in circulation pump as output flow rate.
> Thank you
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190319/76e76374/attachment-0001.html>