[TRNSYS-users] Selecting Variables in TRNSYS-GenOpt

[UMER SALEEM]

Thanks, I'll check it out.

On Thu, Jun 13, 2019, 7:04 PM Jeff Thornton <thornton at tess-inc.com> wrote:

> The only variables that you can optimize using TrnOpt are ones set with
> simple equations:
>
> Area = 10
> Volume = 5
>
> This is explained in detail in the documentation so you might want to
> start there for other tips and tricks.
>
> Jeff - TESS
>
> Sent from my iPhone
>
> > On Jun 13, 2019, at 7:43 AM, UMER SALEEM via TRNSYS-users <
> trnsys-users at lists.onebuilding.org> wrote:
> >
> > Hi respectable members,
> >    How to select optimization variables in TRNSYS-GenOpt file for
> optimization.?? In my Case after choosing input file for optimization upon
> clicking "Select variables" it Shows only Start ,Step and Stop as
> optimization variables.
> > Thanks
> > _______________________________________________
> > TRNSYS-users mailing list
> > TRNSYS-users at lists.onebuilding.org
> > http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190613/96f5d0c1/attachment.htm>