[TRNSYS-users] TRNSYS with Genopt

[David BRADLEY]

Ronny,

  if you have access to the TESS Optimization library for Trnsys17 then 
it provides you with a link between Trnsys17 and GenOpt via an interface 
called TRNOpt.

  If you do not have access to the optimization library then I am aware 
that some users have directly coupled Trnsys17 and GenOpt using the 
instructions that were written for Trnsys16. I am not familiar with the 
procedure but I imagine that there is a fair amount of adaptation of the 
instructions that needs to be done in order for the coupling to work.

kind regards,

  David




On 06/04/2019 18:40, RONNY LEONARDO CORTEZ CASTRO via TRNSYS-users wrote:
> Somebody could explain me how to link genopt with TRNSYS 17? I found a 
> manual for TRNSYS 16 but it does not work for TRNSYS 17. Thanks for 
> your atention.
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190605/6f6d23c5/attachment.htm>