[TRNSYS-users] problem with an equation box
David BRADLEY
d.bradley at tess-inc.com
Mon Jul 8 10:18:41 PDT 2019
Gokula,
Could you please send me the project file and also tell me what
version of Trnsys you are using? I tried to duplicate the problem and I
can use a 7-digit number without any problems.
Thank you in advance,
David
On 07/05/2019 05:07, SENTHIL KUMAR, gokula [Student] via TRNSYS-users wrote:
>
> Hello Trnsys Users
>
>
> When I use a 7-digit number in an equation, the result is shown as
> zero in both the printer and the plotter. However, the impact of this
> equation has been noticed in the output of an integrator. The result
> is zero only when using a 7-digit number. Up to 6-digit number, it is
> working by showing the actual value in the printer and plotter.
> (equation solver mode =0)
>
>
> When I change the equation solver mode from 0 to 2 in the advanced
> settings option. The 7-digit number works and it gets printed and plotted.
>
>
> The equation is simple and it is given below.
>
>
> *Char_T1_M1_g = lt(F3,Fgg)*T1_at_M1***(2880000-B_in3)*
>
> F3, Fgg, T1_at_M1, and B_in3 are variables
>
> Please help me to solve this!
>
>
> Best Regards
>
> Gokula
>
>
>
>
>
>
>
> /Disclaimer:/
>
> /This message (including any attachments) contains confidential
> information intended for a specific individual and purpose. If you are
> not the intended recipient, you should delete this message and notify
> the sender and The Hong Kong Polytechnic University (the University)
> immediately. Any disclosure, copying, or distribution of this message,
> or the taking of any action based on it, is strictly prohibited and
> may be unlawful./
>
> /The University specifically denies any responsibility for the
> accuracy or quality of information obtained through University E-mail
> Facilities. Any views and opinions expressed are only those of the
> author(s) and do not necessarily represent those of the University and
> the University accepts no liability whatsoever for any losses or
> damages incurred or caused to any party as a result of the use of such
> information./
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190708/ecdf1cff/attachment.htm>
More information about the TRNSYS-users
mailing list