[TRNSYS-users] Type 155 can't load when running 'Calling MATLAB' Example

[Keelia LaFreniere]

Hi David,


I have performed all three suggestions and am still encountering the same error. Any chance you have any further suggestions?


Thank you for your help, by the way.


Cheers,


Keelia


________________________________
From: Keelia LaFreniere
Sent: January 18, 2019 11:22:05 AM
To: David BRADLEY; TRNSYS users mailing list at OneBuilding.org
Subject: Re: [TRNSYS-users] Type 155 can't load when running 'Calling MATLAB' Example


Hi David,


I have performed all three suggestions and am still encountering the same error. Any chance you have any further suggestions?


Thank you for your help, by the way.


Cheers,


Keelia LaFreniere

MASc. Candidate, Sustainable Energy Engineering and Policy

Department of Mechanical and Aerospace Engineering

Carleton University | 1125 Colonel By Drive,

Ottawa, ON, K1S 5B6, Canada


________________________________
From: David BRADLEY <d.bradley at tess-inc.com>
Sent: January 18, 2019 10:24:11 AM
To: TRNSYS users mailing list at OneBuilding.org
Cc: Keelia LaFreniere
Subject: Re: [TRNSYS-users] Type 155 can't load when running 'Calling MATLAB' Example


Keelia,

  It certainly sounds as though you have gotten all the key things checked. The only three other items might be to:


1. make sure that there are not more than one reference to Matlab installations in the path environment variable

2. make sure that both your user account and the SYSTEM user account (built in to Windows) both have full read/write access to the Trnsys and Matlab directories.

3. make sure that neither Trnsys nor Matlab is installed in the .\Program Files\ directory. That directory has a lot of read/write restrictions that pertain even to admin user accounts


kind regards,

 David



On 01/17/2019 12:31, Keelia LaFreniere via TRNSYS-users wrote:

Hello everyone,

I am trying to use Type 155 in my simulation, but I can't even get the calling Matlab example running. I encounter the following error:

I am running a x64 system with Windows 10, Matlab R2017b, and 64bit TRNSYS18.

'Your input file uses Type 155 (Calling Matlab). "Type155.dll' was found but could not be loaded. Please make sure that a supported version of Matlan is installed and that Matlab's "bin\win64" (or "bin\win32" if you are using the 32-bit version) folder is on Windows' search path.'

I have made sure the EXE folder in TRNSYS18 contains the Type155.dll version corresponding to my Matlab release. I have also added the folder for Matlab's "bin\win64" to my path environment variable.

I wiped my hard drive and reinstalled everything from scratch. I continue to encounter this issue.

Does anyone have any suggestions? I'd appreciate the help.

Kind regards,

Keelia



_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org


--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com<mailto:d.bradley at tess-inc.com>

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190118/28264966/attachment.htm>