[TRNSYS-users] Fw: Optimization using the TrnOpt, externally using the GenOpt

[鹰隼]

---Original---
From: "鹰隼"<820173803 at qq.com>
Date: Mon, Jan 14, 2019 13:39 PM
To: "trnsys-users"<trnsys-users at lists.onebuilding.org>;
Subject: Optimization using the TrnOpt, externally using the GenOpt


Dear all,


  I am the TRNSYS 18 user. I try to optimize the system design paramaters  using the TrnOpt, externally using the GenOpt. One question is  shown below:


when I open the  WinGenOpt to open the GenOpt project initialization file "GenOpt.ini", one error appers:
 Cannot run program "C:\Program" (in directory "C:\TRNSYS18\genopt-type56\GenOpt-Type56\tmp-genopt-run-1"): CreateProcess error=2, Can't find the specified files.


  I have checked the file path, it is actually exists. 
  
  Any suggestions are appraciate.


Thanks for the attention! 


Best wishes!


Yuekuan


The Hong Kong Polytechnic Univesity
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190115/1e18ef24/attachment.html>