[TRNSYS-users] provision for half effect absorption chiller

[Jeff Thornton]

If the data file formats are similar, you can use the single effect absorption chiller files and modify them to represent the performance of your chiller.

Jeff - TESS

Sent from my iPhone

> On Feb 18, 2019, at 10:07 PM, DHAVALSINH SODHA via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Hello, 
> 
> i am using simulation studio. I want to simulate half effect absorption chiller. but there is provision in library for single effect and double effect chillers only. if low temperature heat is available then half effect chiller is useful.
> 
> what is the solution for it?
> 
> -- 
> Thanks & Regards
> 
> Dhavalsinh R. Sodha (M.E. Thermal Engineering)
> Assistant Professor , Mechanical Department
> Faculty of Engineering & Technology ( PIT )
> (9898917008)
>  
> 
> Office: +91 - 2668 - 260431 / 30 / 28
> University Campus: Waghodia, Vadodara, Gujarat - 391760, INDIA
> www.paruluniversity.ac.in
>  3D PU Campus Tour(360 View Tour) Link
>                  Social Media                       
> Connect with Parul University 
>       
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190219/71193faf/attachment.htm>