[TRNSYS-users] Air source heat pump how to link type56

[David BRADLEY]

Mauro,

  using the ventilation manager in TRNBuild to create a set of mass flow 
rate, temperature, and humidity inputs to Type56 and then connecting the 
output of your heat pump to those inputs is the approach that I'd 
recommend.

  I would recommend using Type954 from the TESS HVAC library if your 
heat pump is an air-to-air device.

kind regards,

  David


On 02/04/2019 17:48, Mauro Cannistraro via TRNSYS-users wrote:
> Hi all, just an easy question. How to link air source heat pump type 
> to building type (56)?!
>
> I’ve seen a way to model connecting by means of ventilation manager with:
> -Temperature input
> -file rate input
> -humidity input
>
>  Is there other way to follow?
>
> For big building (i.e. industrial) which is the right air source heat 
> pump type?!
>
> Tks for reply
>
> -- 
>
> *Ing. Phd. Mauro Cannistraro*
>
> **/University of Ferrara - Department of Architecture/
>
> /TekneHub. Via Saragat  13 - 44122 Ferrara (I)/
>
> /Tel. +39 0532 29 3662//
> /
>
> /Mob. +39 329 97 40 211/
>
> /Mail. mauro.cannistraro at unife.it <mailto:mauro.cannistraro at unife.it>/
>
> /Pec. mauro.cannistraro at ordineingpa.it 
> <mailto:mauro.cannistraro at ordineingpa.it> /
>
>
> Le informazioni trasmesse sono destinate esclusivamente alla persona o 
> alla società in indirizzo e sono da intendersi confidenziali e 
> riservate. Ogni trasmissione, inoltro, diffusione o altro uso di 
> queste informazioni a persone o società differenti dal destinatario è 
> proibita
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190205/3145c737/attachment.htm>