[TRNSYS-users] TRNSYS-users Digest, Vol 170, Issue 15
thornton at tess-inc.com
Thu Feb 21 09:48:34 PST 2019
It won’t be a very exciting plot because parameters don’t change with time, but if you still want to do it the easiest way is with equations. Set an equation to the collector area, use that name when you specify the area in the parameters tab of the proforma, and then connect that equation to your plotter.
Jeff - TESS
Sent from my iPhone
> On Feb 21, 2019, at 11:18 AM, Farhan Malik via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> I want to ask you that can i plot on graph the parameters of any component in TRNSYS. There is option to plot output variables but there is no option to plot parameters.
> Like i want to plot area of flat plate collector...
>> On Feb 15, 2019 3:02 AM, <trnsys-users-request at lists.onebuilding.org> wrote:
>> Send TRNSYS-users mailing list submissions to
>> trnsys-users at lists.onebuilding.org
>> To subscribe or unsubscribe via the World Wide Web, visit
>> or, via email, send a message with subject or body 'help' to
>> trnsys-users-request at lists.onebuilding.org
>> You can reach the person managing the list at
>> trnsys-users-owner at lists.onebuilding.org
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of TRNSYS-users digest..."
>> Today's Topics:
>> 1. Re: Type531->534 illegal param value error (Jeff Thornton)
>> ---------- Forwarded message ----------
>> From: Jeff Thornton <thornton at tess-inc.com>
>> To: "TRNSYS users mailing list at OneBuilding.org" <trnsys-users at lists.onebuilding.org>
>> Cc: Le Talave <contact at letalave.com>
>> Date: Thu, 14 Feb 2019 10:22:27 -0600
>> Subject: Re: [TRNSYS-users] Type531->534 illegal param value error
>> Did you use the plug-in to generate the data file or try to do it by hand? The plug-in does all of the file formatting for you and is highly recommended!
>> Jeff - TESS
>> Sent from my iPhone
>>> On Feb 14, 2019, at 3:35 AM, Le Talave via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
>>> I'm trying to use the Tess lib Flat bottom Tank type 531. As specified in the documentation, I write all the parameters needed in the data file, but tnrsys returns a message 103, with an illegal parameter. The reference of this parameter is variable for the same simulation, so it seems that i can't use it to find the error. "Parameter 9" error often comes back. I tried many configurations, with no ports, no hx, no auxiliary, I carefully cycled the concerned parameters by repeating them in the file, but the problem is the same.
>>> Is there a special syntax to use in the dat file? When the documentation says "no further parameter is needed", should I continue with the next used parameter or do I have to write something in the dat file before go the the next one? Is it possible to annotate the dat file (write a text that type531 doesn't "see"), so that I can give a name to each parameter and make faster modifications?
>>> Thanks a lot for your help
>>> Kind regards,
>>> TRNSYS-users mailing list
>>> TRNSYS-users at lists.onebuilding.org
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the TRNSYS-users