[TRNSYS-users] Fwd: Multizone coupling

[Michele Vella]

I have 2 zones on top each other but there is no ceiling touching them so i
did the 2 touching surfaces as virtual surfaces.The problem is I dont know
how to couple them together as when i heat the upper zone it is not
effecting the temperature of the lower zone. When i press couple on the TRN
build it just shows up the airnode window.

Regards
Michele Vella
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190213/c5fa6c12/attachment.html>