[TRNSYS-users] WG: How to conduct parametric analysis in TRNSYS

[Kersken, Matthias]

Hi,

JEplus might be worth a look
www.jeplus.org<http://www.jeplus.org>

With best regards,
                Matthias

--
Dr.-Ing. Matthias Kersken
Evaluation and Demonstration
Department Energy Efficiency and Indoor Climate

Fraunhofer Institute for Building Physics IBP, Holzkirchen Branch
Fraunhoferstr. 10 | 83626 Valley | Germany

Phone: +49 8024 643-204 | Fax: +49 8024 643-366
matthias.kersken at ibp.fraunhofer.de<mailto:matthias.kersken at ibp.fraunhofer.de>
http://www.ibp.fraunhofer.de





Von: SALMA LAHMAR <s.lahmar at enim.ac.ma>
Gesendet: Sonntag, 8. Dezember 2019 14:34
An: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Betreff: [TRNSYS-users] How to conduct parametric analysis in TRNSYS

I have to  run a lot of simulations to calculate the building energy consumption depending on the value of different parameters.
I tried to use trnedit to make a table but I don't know how to have a result of all simulation in one output file like : \Examples\Parametric Runs\SDHW-ParametricRuns in trnsys.
thanks in advance
[Das Bild wurde vom Absender entfernt.]ᐧ
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20191211/dba5c036/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ~WRD000.jpg
Type: image/jpeg
Size: 823 bytes
Desc: ~WRD000.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20191211/dba5c036/attachment-0002.jpg>