[TRNSYS-users] TRNSYS Simulation Fresnel & steam

[Lucia Royo Pascual]

Hello TRNSYS users,

I am writing to you this e-mail in order to ask you about the simulation of steam cycle using a solar field (Fresnel or flat plate collector).

The idea is to simulate the water-steam stream using the solar field. I have seen that there is the possibility to use a flash tank to separate water and steam in the TESS library. In this tank, it is possible to define the pressure. However, I have seen that in the solar collector field it is not possible to fix the outlet pressure, only the Cp can be modified.

Could you explain me briefly how can I change the outlet pressure in the collector type? It is possible to define steam at the outlet using a control? Is there any example that I can use to start my simulation?
I have TESS libraries, but I have seen that there is no example of this feature...

Thank you in advance,

Kind regards,

[cid:image007.png at 01D49187.2B8C8970]<http://fcirce.es/>
www.fcirce.es

PhD. Lucía Royo Pascual
Technology Project Manager
Industrial Processes Group
Industry and Energy Area

Parque Empresarial Dinamiza, Avda. Ranillas 3D,1ª Planta
50018 Zaragoza (España)
T. [+34]  976 976 859 / Ext. [+34] 2112
lroyo at fcirce.es<mailto:lroyo at fcirce.es>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190812/d8982376/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 8042 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190812/d8982376/attachment.png>