[TRNSYS-users] Setting number precision in the output file from Printer

Jeff Thornton thornton at tess-inc.com
Sun Sep 9 09:21:48 PDT 2018


 

Mariam, 

You can use the formatted output option in Type 25 to control the output
format. Read the documentation for Type 25 for more details. 

Jeff 

---
Jeff Thornton
President - TESS LLC
3 N. Pinckney Street, Suite 202, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 09/09/2018 3:48 am, Mariam Elnour via TRNSYS-users wrote: 

> Dear all, 
> 
> I would like to ask if its possible to specify the number of digits of the measurements data that are printed to the output file? 
> 
> The precision is too high and produces large output files when very small time step and large run duration. 
> 
> I really really appreciate your reply. 
> 
> Regards 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180909/f5943180/attachment.htm>


More information about the TRNSYS-users mailing list