[TRNSYS-users] TRNEXE - what file registers which time series are not to be actively plotted on a System Plot?

[Eric Peterson]

Regarding TRNEXE v 1.81 (TRNSYS 17 simulation time series on-line plotter)

Is there something I can do from Simulation Studio Assembly/Output manager to supress left and right axis plots until I select them by clicking on the legend  of TRNEXE?

I am running 20 year simulations each with eight  System Plots with ten time series on the left-axis and ten on the right-axis.

I am resorting to first running a few hours simulation and painstakingly clicking "Off" all but one or two time series on each System Plot, so the others are greyed out on the legend and the graphics run quickly on longer simulations.  I like to have the normally grey-out items on the legend so I can inspect and trouble shoot occasionally.

I notice my choice of which time series are actively plotted is remembered in subsequent simulations.

Is there a file I can edit to instruct TRNEXE not to plot the timeseries unless I click on a (grey-out) menu item that I am interested in?

Eric Peterson, PhD, PE, RPEQ, M-ASHRAE TC4.2 Climatic Data
Research Fellow in Geothermal Systems Modelling
http://www.geotech-project.eu/?portfolio=university-of-leeds
School of Civil Engineering, University of Leeds
Leeds, West Yorkshire LS2 9JT United Kingdom
Telephone +44 (-0) 11334 31957



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180926/f6e829cf/attachment.html>