[TRNSYS-users] Optimization algorithms GenOpt/TRNOPT Hooke-Jeeves

[David BRADLEY]

Michel,

  You are correct; not all of the optimization methods available in 
GenOpt are implemented in TRNOpt. TRNOpt is designed to work with a 
particular version of GenOpt. TRNOPT v17 is designed to work with the 
GenOpt version 3.0.3 and it may be that the optimization algorithm that 
you want to use was not implemented in that particular version of 
GenOpt. If that is the case then you'll unfortunately not be able to use 
the TRNOpt interface. You can still link up Trnsys with GenOpt but 
you'll need to do so without the interface (ie following the directions 
in GenOpt's documentation).

kind regards,

  David



On 11/09/2018 08:10, Michel Tamarzians via TRNSYS-users wrote:
>
> Dear all
>
> To optimize my simulation I want to use the embedded GenOpt in TRNSYS 
> (TRNOPT).  In the Genopt manual many different algorithms are given, 
> however not all of them are given as an option when running the genopt 
> with a TRNSYS *dck file. For example, the manual speaks of the 
> Hooke-Jeeves method with multiple starting points (Hooke-JeevesMS) but 
> this is not an option in the tabs. Instead the Hooke-Jeeves method 
> with only one starting point can be chosen. Anyone else having the 
> same issue or knows a solution for this?
>
>
> Many thanks!
>
> Kind regards,
>
> Michel
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20181109/64e0e634/attachment.htm>