[TRNSYS-users] Max heat load calculation error

[Rijvers, L.P.M.]

Dear TRNSYS users,

I am trying to calculate the max. heat load of a building. Unfortunately, an error appears when I try to do so.
The cause of this error is not clear. I already checked the listing file. Find attached the .bui-file I am using.

Thanks in advance.

With kind regards,

Len

[cid:image001.png at 01D4653F.FFFE2DE0]   [SBC Logo zonder tekst]
Len Rijvers
Eindhoven University of Technology
Mechanical Engineering, PDEng trainee Smart Buildings and Cities Program
Gemini-Noord 2.119
T: +31 647 59 29 16

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20181120/e802d91d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 6522 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20181120/e802d91d/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 3038 bytes
Desc: image002.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20181120/e802d91d/attachment-0003.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Terraced_House_S_BENG_V5.b17
Type: application/octet-stream
Size: 40232 bytes
Desc: Terraced_House_S_BENG_V5.b17
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20181120/e802d91d/attachment-0001.obj>