[TRNSYS-users] PVT solar collector with to heat gain

[Jibi Jais (지비 제이즈)]

Hai

I think you have a very large flow rate such that there is a negligible
temperature rise across the collector.
Try reduce the flow rate and see again.
I also faced a similar problem before.

Regards
Jibi Jais




On Sun, May 13, 2018 at 4:36 AM, Amirreza Heidary via TRNSYS-users <
trnsys-users at lists.onebuilding.org> wrote:

> Dear All
> I have used the PVT solar collector (type 560) for Sydney climate. I do
> not see any temperature increase in the collector fluid outlet temperature
> compared to the inlet temperature! I have checked the radiation inputs. Do
> you have any suggestions?
> Thank you
>
>
>
>
>
>
>
> [image: Mailtrack]
> <https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=signaturevirality4&> Sender
> notified by
> Mailtrack
> <https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=signaturevirality4&>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>

-- 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180516/ee6e8307/attachment.htm>