[TRNSYS-users] Problem with QHEAT
freppelw at noirot.fr
Tue May 15 04:46:42 PDT 2018
I'm glad to talk to you again. If you don't mind, could you please take
a look at my project. I'm sure there is a link error between the b17
file and the TRNSYS project. I may not be clear, but I have the feeling
that the Qheat values that I set as output in the b17 file are not
"really" sent to the project. What makes me think that is that the Qheat
outputs appear in the "Output definition" cell but not in the "Resulting
output list" cell (I attached a screen shot that explains my assumption).
I created a simple project with a 2 cubic meter box as a house, and set
a heating system. I did get a coherent evolution of Qheat. So I may have
an error in my project that I am not able to identify.
I do thank you in advance for helping me.
Ingenieur Doctorant en Recherche & Developpement
Centre R&D de Noirot - Groupe Muller
8 rue Louis Ampere, 02030 Laon
+33 (0)3 23 27 31 99
Le 15/05/2018 à 12:34, hotline via TRNSYS-users a écrit :
> Dear Wirich,
> unfortunately I couldn't reproduce your problem with the attached files. NTYPE 30 - Qheat as well as Balance-4 varies to reach the set temperatures of 16°C and 22°C.
> As weather file I used FR-Nice_76900.tm2. I have also tested it with limited/unlimited and with/without TRNFlow.
> -----Ursprüngliche Nachricht-----
> Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von Wirich FREPPEL via TRNSYS-users
> Gesendet: Dienstag, 15. Mai 2018 11:34
> An: trnsys-users at lists.onebuilding.org
> Cc: Wirich FREPPEL <freppelw at noirot.fr>
> Betreff: Re: [TRNSYS-users] Problem with QHEAT
> Dear TRNSYS users,
> I don't find any solution to get the real Qheat. Though in the SUMMARY.BAL file, the total Qheat changes when I change the heating system. So it definitely works.
> I attach to this mail some files that could help you find the problem.
> Thank you in advance
> Best regards
> Wirich FREPPEL
> Ingenieur Doctorant en Recherche & Developpement Centre R&D de Noirot - Groupe Muller
> 8 rue Louis Ampere, 02030 Laon
> +33 (0)3 23 27 31 99
> Le 15/05/2018 à 09:09, Wirich FREPPEL via TRNSYS-users a écrit :
>> Dear TRNSYS users,
>> In my TRNSYS project I set a heating system, with 16°C and 22°C as
>> night and day temperature setpoint, and unlimited power. As the
>> output, I chose QHEAT to get the energy needed to reach the setpoint.
>> However, for any type of weather file, the result is the same. When I
>> activate TRNFLOW calculations, QHEAT is constant. When I deactivate
>> it, QHEAT is null.
>> Do you have any explanation?
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 587520 bytes
Desc: not available
More information about the TRNSYS-users