[TRNSYS-users] building with levels

David BRADLEY d.bradley at tess-inc.com
Mon May 14 07:40:55 PDT 2018


That is going to make life a lot harder. Trnsys16 did not have a 3D 
graphical building interface for Type56. You have to define each surface 
of the building in TRNBuild and manually specify whether it is an 
external surface, a boundary surface, or an adjacent surface. Section 
6.1.8 of 06-MultizoneBuilding.pdf is the only tutorial available on the 
Trnsys16 process to my knowledge.

kind regards,

  David



On 05/13/2018 02:18, Lakjiri Souad wrote:
> Thank you! I have TRNSYS V 16☺
>
> On Sat, 12 May 2018 10:42 pm David BRADLEY, <d.bradley at tess-inc.com 
> <mailto:d.bradley at tess-inc.com>> wrote:
>
>     There is not really any answer to your question. The way that you
>     zone a building depends on what you want to know from your
>     simulation. If you are combining a thermal and airflow simulation
>     of the building then you might treat each room as its own zone. If
>     you have a very large building (such as a highrise) then you might
>     treat every floor as a zone or perhaps you might divide each floor
>     into a core zone and as many perimeter zones as there are solar
>     orientations. In between those two extremes, it is not uncommon to
>     choose thermal zones that correspond to the HVAC zones of the
>     building (areas that are controlled by one thermostat).
>
>     If you are using Trnsys18 there is an extensive tutorial in the
>     .\Trnsys18\Documentation\ folder that will teach you what you need
>     to know to model buildings. If you have Trnsys17 then there is a
>     less extensive but still useful tutorial in
>     ..\Trnsys17\Documentation\A4_3DBuildingTutorial.pdf
>
>     kind regards,
>
>      David
>
>
>
>     On 05/12/2018 12:43, Lakjiri Souad via TRNSYS-users wrote:
>>     Hi
>>     I am a beginner in Trnbuild, how can I subdivide a tertialy
>>     building composed of 3 buildings .Each building composed of 4
>>     levels.Each flour is composed of several offices,rooms and halls!
>>     I am seachinf an optimal subdivision on zones.
>>     Thankyou
>>
>>
>>
>>     _______________________________________________
>>     TRNSYS-users mailing list
>>     TRNSYS-users at lists.onebuilding.org
>>     <mailto:TRNSYS-users at lists.onebuilding.org>
>>     http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>     -- 
>     ***************************
>     David BRADLEY
>     Principal
>     Thermal Energy Systems Specialists, LLC
>     22 North Carroll Street - suite 370
>     Madison, WI  53703 USA
>
>     P:+1.608.274.2577
>     F:+1.608.278.1475
>     d.bradley at tess-inc.com <mailto:d.bradley at tess-inc.com>
>
>     http://www.tess-inc.com
>     http://www.trnsys.com
>

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180514/f6ea57c2/attachment.htm>


More information about the TRNSYS-users mailing list