[TRNSYS-users] (no subject)

David BRADLEY d.bradley at tess-inc.com
Fri May 18 08:25:49 PDT 2018


There is not a way of adding those inputs or outputs to Type56. Instead 
you have to determine how the energy in the water coming from the heat 
pump is transferred to the zone. Is it by a radiator? By a fan coil? 
Does it go to a radiant floor? You'll need to define the delivery device 
as another Type in your project. If energy is delivered by an air stream 
then in TRNBuild you'll need to define a VENTILATION with temperature, 
flow rate, and RH as inputs. If energy is delivered by a radiant floor 
then you'll need to define an active layer in the floor of your building 
in TRNBuild.

kind regards,

  David



On 05/18/2018 08:19, berkane ahlem via TRNSYS-users wrote:
>
> Hello sirs,
> how can i add in the input and _output_ of type 56 the water 
> (_flow_,temperater) caming from heat pump
> Thank you
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180518/8a975923/attachment.html>


More information about the TRNSYS-users mailing list