[TRNSYS-users] severe 408 when generating ISM and SHM matrix

[Karol BANDURSKI]

Dear Experts,

 

I have create model of a few zones. When I modify it in some ways and then
generate ISM and SHM matrix, then I get error (enclosed). There are two
modification that give me this error:

-          export from TRNBuild to IDF, division of floor/ceiling on a few
smaller parts and reimport to TRNSYS, problem appear.

-          export from TRNBuild to IDF, division of floor/ceiling on smaller
parts (but less then above) and then reimport to TRNSYS (ISM and SHM
generate without problems), but when I change some floors/ceilings on active
layers problem appear again.

 

I would be grateful for any advice!

 

Karol

 

--------------------------------------------------------------------

Karol BANDURSKI M. Sc.

Faculty of Civil and Environemntal Engeneering

Division of Heating, Air Conditioning and Air Protection

Poznan University of Technology

 <http://www.put.poznan.pl/~karol.bandurski> www.put.poznan.pl/~karol.
bandurski

 <https://www.researchgate.net/profile/Karol_Bandurski>
https://www.researchgate.net/profile/Karol_Bandurski

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180505/9291a368/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: error.png
Type: image/png
Size: 13720 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180505/9291a368/attachment-0001.png>