[TRNSYS-users] TYPE 194A

[David BRADLEY]

Leen,

   The azimuth is already considered by Type15. The outputs from Type15 
are the beam, diffuse, etc. radiation on the surface that you defined in 
Type15's parameters.

kind regards,

  David



On 06/15/2018 08:43, leen peeters via TRNSYS-users wrote:
> Hi,
>
> when connecting type 15 to type 194a using the following connections, 
> the orientations (azimuth) is not considered in the calculation.
> What did I do wrong?
>
>
>
>
>
> Leen
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180618/852e73ba/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 5824 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180618/852e73ba/attachment-0002.png>