[TRNSYS-users] air-air heat pump

[Freppel Wirich]

Dear David,

Thank you for your reply, and thanks to Jeff as well for the 
information. I downloaded the demo version of TRNSYS 18 and I did find 
the Type 119. I'll use that one until I get the TESS HVAC library 
package. I think it's time to upgrade to TRNSYS 18 :)

Best regards,

Wirich


Le 13/07/2018 à 14:37, David BRADLEY a écrit :
> It depends on which version of Trnsys you are using. If you are using 
> Trnsys16 or 17 there are air to air heat pump models in the TESS HVAC 
> library. Trnsys18 has an air-to-air heat pump in its standard library 
> but it is a bit more limited than the one that is available in the 
> TESS HVAC library.
>
> kind regards,
>
>  David
>
>
>
> On 07/13/2018 04:58, Freppel Wirich via TRNSYS-users wrote:
>> Dear TRNSYS users,
>>
>> I would like to add an air-air heat pump in my simulation project. 
>> But I'm not sure of what type I should use.
>>
>> I found the Type 20, but it seems to be used only for heating, while 
>> I would like to cool as well.
>>
>> I found also the type 938, but I don't have access in my TRNSYS version.
>>
>> According to my research, there are more heat pump types that I could 
>> purchase (TESS HVAC components library). Do you confirm that 
>> information?
>>
>> Otherwise, what would be the ideal type to use in my case? (air-air 
>> heat pump for cooling and heating).
>>
>> Thanks in advance
>>
>

-- 
Wirich Freppel
Ingenieur de Recherche et Développement
Centre R&D Noirot - Groupe Muller
8 rue Ampere, 02030 Laon
+33 3 23 27 31 99