[TRNSYS-users] TRNSYS-users Digest, Vol 163, Issue 31

[Mehrdad Vojdani]

Hi Jeff,

Thanks for your answer. I check the air source heat pump type. Sample
catalogue data includes a lot of information about the heat pump. I cannot
find any catalogue with this amount of performance data.

I wonder if you know how to get this kind of catalogue?

Best regards,
Mehrdad

On Sat, Jul 21, 2018 at 12:51 AM, <
trnsys-users-request at lists.onebuilding.org> wrote:

> Send TRNSYS-users mailing list submissions to
>         trnsys-users at lists.onebuilding.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.onebuilding.org/listinfo.cgi/trnsys-users-
> onebuilding.org
>
> or, via email, send a message with subject or body 'help' to
>         trnsys-users-request at lists.onebuilding.org
>
> You can reach the person managing the list at
>         trnsys-users-owner at lists.onebuilding.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>    1. heat pump system (Mehrdad Vojdani)
>    2. Re: heat pump system (Jeff Thornton)
>    3. How to connect absorption chiller to building cooling load
>       (Sinchote Keeratianant)
>
>
> ---------- Forwarded message ----------
> From: Mehrdad Vojdani <vojdani227 at gmail.com>
> To: trnsys-users at lists.onebuilding.org
> Cc:
> Bcc:
> Date: Fri, 20 Jul 2018 02:33:52 +0430
> Subject: [TRNSYS-users] heat pump system
> Dear trnsys users,
>
> I want to model a DX heat pump in trnsys. this system includes an outdoor
> air cooled heat exchanger, indoor heat exchanger, compressor and expansion
> valve.
> Rhere are too many heat pumps in hvac TESS library and I'm confused about
> tupe selection.
>
> This heat pump can be modeled type by type ( compressor , ... ) but there
> is no benefit in that for me.
> I want system COP and power consumption as output.
>
> I would appreciate if you can help me with right type selection foe my
> system .
>
>
> Thanks for your answers,
> Best Regard,
> Mehrdad.
>
>
> ---------- Forwarded message ----------
> From: Jeff Thornton <thornton at tess-inc.com>
> To: "TRNSYS users mailing list at OneBuilding.org" <
> trnsys-users at lists.onebuilding.org>
> Cc:
> Bcc:
> Date: Thu, 19 Jul 2018 18:13:29 -0500
> Subject: Re: [TRNSYS-users] heat pump system
>
> The device you are referring to is called an air source heat pump within
> the TRNSYS environment.  There are models in the standard HVAC library as
> well within the TESS HVAC Library for TRNSYS.  Both rely on a catalog data
> look up approach based on indoor and outdoor conditions.
>
>
>
> Jeff
>
>
>
> ---
> Jeff Thornton
> President - TESS LLC
> 22 N. Carroll Street, Madison WI USA 53703
> Office: (608) 274-2577  Fax: (608) 278-1475www.tess-inc.com
> E-Mail: thornton at tess-inc.com
>
> On 07/19/2018 5:03 pm, Mehrdad Vojdani via TRNSYS-users wrote:
>
> Dear trnsys users,
>
> I want to model a DX heat pump in trnsys. this system includes an outdoor
> air cooled heat exchanger, indoor heat exchanger, compressor and expansion
> valve.
> Rhere are too many heat pumps in hvac TESS library and I'm confused about
> tupe selection.
>
> This heat pump can be modeled type by type ( compressor , ... ) but there
> is no benefit in that for me.
> I want system COP and power consumption as output.
>
> I would appreciate if you can help me with right type selection foe my
> system .
>
>
> Thanks for your answers,
> Best Regard,
> Mehrdad.
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at lists.onebuilding.orghttp://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
>
> ---------- Forwarded message ----------
> From: Sinchote Keeratianant <cole_sin at hotmail.com>
> To: "trnsys-users at lists.onebuilding.org" <
> trnsys-users at lists.onebuilding.org>
> Cc:
> Bcc:
> Date: Fri, 20 Jul 2018 04:22:21 +0000
> Subject: [TRNSYS-users] How to connect absorption chiller to building
> cooling load
>
> Dear TRNSYS users,
>
> I'm a beginner in TRNSYS and using TRNSYS 18.
>
> I have a performance data of absorption chiller and i would like to
> validate the cooling capacity of absorption chiller has enough size with
> building cooling load or not.
>
> Then, How can i connect the absorption chiller model type 107 to building
> cooling load model type 56?
>
> Could you help me please?
>
>
> Thank you.
>
>
> Sinchote Keeratianant
>
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180721/1044a993/attachment-0001.html>