[TRNSYS-users] Rankine cycle simulation by using CHP library TESS

[qin.jiyun at foxmail.com]

Hi Tim, 

Thanks for your reply. The Type591C can be run correctly. I have another question about this TESS Library. 

I have another question about this library. I found that the modules of this TESS Library for simulating steam generator (Type637) and superheater (Type617) are steam heating steam system. Is this TESS library can be used to simulate the component of a coal fired boiler (e.g. superheater, evaporator)? 

Best Regards,
Jiyun QIn




 
From: Technical Support
Date: 2018-07-18 23:26
To: qin.jiyun
Subject: Re: Re: Rankine cycle simulation by using CHP library TESS
Jiyun Qin -
You can download the update dlls at
http://www.tess-inc.com/site-com/assets/filedownloads/TESSCogenLibrary.zip
You will need to place the dlls in the appropriate TRNSYS17/UserLib/DebugDLLS and /ReleaseDLLs directories.  You should also delete the older Cogen library Dlls.
Regards,
Tim
 
---
Technical Support Team 
Thermal Energy System Specialists, LLC 
22 N. Carroll St, Suite 370 
Madison, WI 53703 
techsupport at tess-inc.com
www.tess-inc.com
www.trnsys.com
TRNSYS on Facebook
 
 
On 2018-07-18 04:21, qin.jiyun at foxmail.com wrote:
Hi Tim, 
 
Thanks for you feedback. The attachment is my user id file. 
 
Thanks for your help. 
 
Best Regards,
Jiyun Qin
 


 
 
From: Technical Support
Date: 2018-07-18 03:34
To: qin.jiyun
Subject: Re: Rankine cycle simulation by using CHP library TESS
Jiyun Qin -
As was answered on the TRNSYS user list, there is an issue with Type591 in the TESS CHP Library.  Please send us your user id file so we can access your TRNSYS records.
Regards,
Tim
 
---
Technical Support Team 
Thermal Energy System Specialists, LLC 
22 N. Carroll St, Suite 370 
Madison, WI 53703 
techsupport at tess-inc.com
www.tess-inc.com
www.trnsys.com
TRNSYS on Facebook
 
 
On 2018-07-17 10:12, qin.jiyun at foxmail.com wrote:
Dear Someone, 
 
I use the CHP library to develop a model for Rankine cycle power plant. I use the Type 591C to simulate the high pressure stage turbine firstly. This HP stage turbine has two extraction steam, with extraction pressure at 54.41 and 34.62 bar, and the inlet pressure and temperature of this turbine is 167 bar and 537 C. When I put the paramaters of this turbine as the input into the Input sheet of this module, there is a mistake when I run this module. It shows that
 "TRNSYS Message 127: The current Unit has tried to access an Input value higher than the number of outputs for the Type. Reported information: Not available". 
 
This is no mistakes for the paramapers of steam turbine. What's the problem of my model? The attachment is the model. 
 
Looking fordward for your feedback. 
 
Best Regards,
Jiyun Qin
 


 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180719/93187446/attachment.html>