[TRNSYS-users] Surface Temperature

[Elise BERNARD]

Hi,

Does anybody have any idea to solve my problem ?

Elise Bernard

De : Elise BERNARD
Envoyé : mercredi 27 juin 2018 12:33
À : 'TRNSYS users mailing list at OneBuilding.org' <trnsys-users at lists.onebuilding.org>
Objet : [TRNSYS-users] Ssurface Temperature

Hi,

I use TRNSYS to model an office building (new construction, good insulation) and check the comfort inside.
I would like to verify the surface temperature of the floor of each zone. So I use the build surface outputs 17 TSI and 18 TSO.
The set temperatures are 20°C during the day and 16°C during the night.
The surface temperature of the floor seems to be very low sometimes : 2°C or 3°C below the set temperature.
I already checked the ventilation, infiltration, heat temperature, temperature of zones nearby.

Did you already observe this kind of results ? Do you know why ?

Thanks

Elise Bernard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180716/ea098fb6/attachment.html>