[TRNSYS-users] Type 907 zero output

David BRADLEY d.bradley at tess-inc.com
Mon Jan 29 06:58:14 PST 2018


Mr Taherian,

   There are a number of possibilities. The most likely is that the 
input for "Desired Output Power" is set to zero.

kind regards,

  David



On 01/28/2018 16:42, Taherian, Hessam via TRNSYS-users wrote:
>
> I have started modeling a cogeneration system based on Type 907 
> engine-generator. The output of the engine is zero (no error) when I 
> run the simulation. I am using the default performance data that comes 
> in TESS libraries. What could be the issue?
>
> Thanks
>
> H Taherian
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180129/6db1cd9b/attachment.htm>


More information about the TRNSYS-users mailing list