[TRNSYS-users] R: type 155 and GenOpt

Riccardo Nesa riccardo_sas at hotmail.it
Mon Jan 22 06:11:17 PST 2018


Maybe you are right;

you can read the help documentation of trnsys (mathematical reference, 4.13.20 type 155: calling matlab, pag. 451) for some clarification.

To avoid some problems i have installed matlab 2011b 32 bit with trnsys 17.

check trnsys17/exe/DLLs. there you can see the dlls for type 155.

[cid:767d1ada-c3ec-4a20-9489-09bf067b6a59]

if you don't see your matlab version i think the software can't work.

these are what i know, let me know if you can fix it.


________________________________
Da: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> per conto di Elisa Ghirardi via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Inviato: lunedì 22 gennaio 2018 14:35
A: TRNSYS users mailing list at OneBuilding.org
Cc: Elisa Ghirardi
Oggetto: [TRNSYS-users] R: type 155 and GenOpt


thanks Riccardo for your reply and your help.

Unfortunately I have already set all the mFileErrorCode like your suggestion but I still have the same error.



It would be an issue with a too recent version of Matlab? (I’m using a 64-bit version of Trnsys 18 (18.00.0016) with a 64-bit version of Matlab 2016a)



Elisa Ghirardi



Da: Riccardo Nesa via TRNSYS-users<mailto:trnsys-users at lists.onebuilding.org>
Inviato: lunedì 22 gennaio 2018 12:13
A: TRNSYS users mailing list at OneBuilding.org<mailto:trnsys-users at lists.onebuilding.org>
Cc: Riccardo Nesa<mailto:riccardo_sas at hotmail.it>
Oggetto: Re: [TRNSYS-users] type 155 and GenOpt



Hi elisa



you have to put "mFileErrorCode=some_number" in the m.file to get the point when your script fails and you MUST write "mFileErrorCode=0" at the end of the m.file.

[cid:ec28adef-8cbc-4f0a-9b64-5e7b386b2d6f]





you have to write



"mFileErrorCode=0

return

"

also at the end of some particular  "if statment" like:





if trnInfo(8)==-1

...

...

...

mFileErrorCode=0

return











Da: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> per conto di Elisa Ghirardi via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Inviato: lunedì 22 gennaio 2018 09:30
A: trnsys-users at lists.onebuilding.org
Cc: Elisa Ghirardi
Oggetto: [TRNSYS-users] type 155 and GenOpt



Hi TRNSYS users,



I’m trying to run an optimization with TrnOpt with a link with matlab (type 155). The single simulation works, but when I run the optimization I have always the same error: “The M-File did not properly set 'mFileErrorCode' to 0 when it was called. This may indicate that an error occurred in Matlab while running the M-File. 'mFileErrorCode' was left to 1 by the M-File. You can set ignoreEngineClose to 1 and run the 'lasterr' command in Matlab to help diagnose the  problem. The error occurred at info(7) =            0 , info(13) =            0”.

I think it’s a problem  with matlab file access because , despite the .m file being inserted into the GenOpt input file, the GenOpt seems unable to start it, in fact GenOpt starts matlab but then fails to open the file.



Someone of you has already dealt with this issue?



Kind regards,



Elisa Ghirardi

University of Bergamo, Italy.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180122/2337fb14/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: B0C396CA266D4805BB61D82556E4FF7E.png
Type: image/png
Size: 158 bytes
Desc: B0C396CA266D4805BB61D82556E4FF7E.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180122/2337fb14/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pastedImage.png
Type: image/png
Size: 10261 bytes
Desc: pastedImage.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180122/2337fb14/attachment-0005.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 04-MathematicalReference.pdf
Type: application/pdf
Size: 2542079 bytes
Desc: 04-MathematicalReference.pdf
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180122/2337fb14/attachment-0002.pdf>


More information about the TRNSYS-users mailing list