[TRNSYS-users] TRNBuild3D

[Marius Poyard]

I launch Simulation Studio, i create a new project, i click on « 3D Building Project(multizone) » and after, when i have to choose the idf file, i select it a the right location. And when i click on « open », it load during 2 seconds and i have a pop up window with writen : « no Output’s specified / please add at least one output »



Thanks for your help



________________________________
De : TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> de la part de Wirich via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Envoyé : Tuesday, January 16, 2018 3:07:30 PM
À : TRNSYS users mailing list at OneBuilding.org
Cc : freppelw at noirot.fr
Objet : Re: [TRNSYS-users] TRNBuild3D

Dear Marius,

Can you detail at which step you get this error message?

Regards

Wirich

Le 2018-01-16 20:47, Marius Poyard via TRNSYS-users a écrit :
> Hello
>
> I’m just starting to work ON TRNSYS and i’doing some tutorials.
>
> I tried to make a very simple house geometry : a cube, on SketchUp
> with the TRNBuild3D extension. But when i use the .idf file in TRNSYS,
> i had the message « no Output’s specified / please add at least one
> output ».
>
> I can’t find anything explaining what are these outputs or how to
> create them.
>
> Thnaks for your help
>
> Marius
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180117/47a8ac4a/attachment.htm>