[TRNSYS-users] How to specify no movable shadings when importing 3D building using the wizard

[David BRADLEY]

Yossef,

  I usually set those values to close if > 10000 and open if less than 
10000. The value in question is the incident solar radiation (in 
kJ/h.m2). Typically the solar radiation will never exceed 5000 kJ/h.m2 
so the value of 10000 removes the shades from consideration.

  Your method sounds to me as though it will work as well. I am not sure 
on the source of 120 and 140 but setting the max shade value to 0 will 
do the job.

kind regards,

  David



On 12/30/2017 07:54, Yossef Ibrahimi via TRNSYS-users wrote:
> Dear Trnsys community,
> I'm using the wizard to import the 3D building project, but it shows 
> me options for shadings, I want to specify that there is no shadings, 
> so I left "close if total..." set to 140, "open if total..." set to 
> 120, *and for maximum I put 0 as a value*. Is that the correct way to 
> ignore movable shadings?
> Thank you
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180104/015d59bb/attachment.html>