[TRNSYS-users] active layer

Karol BANDURSKI karol.bandurski at put.poznan.pl
Mon Feb 19 11:42:19 PST 2018


Dear Marion and Christoph,

 

I am sorry for my mistake, I have overlook one connection.

 

Everything is ok.

 

Regards,

Karol

 

 

From: Marion Hiller [mailto:Hiller at Transsolar.com] 
Sent: Monday, February 19, 2018 1:04 PM
To: TRNSYS users mailing list at OneBuilding.org
<trnsys-users at lists.onebuilding.org>; trnsys-users at cae.wisc.edu
Cc: Karol BANDURSKI <karol.bandurski at put.poznan.pl>
Subject: AW: [TRNSYS-users] active layer

 

Karol,

 

did you define the ceiling containing the TAB as ADJACENT surface between
the two airnodes?

If yes, NType 58 should give the same result no matter which airnode
/surfaceID is selected.

 

If you can't detect any other error (like looking at a wrong output.) you
may send your project to (hotline at transsolar.com
<mailto:hotline at transsolar.com> ).

 

Marion

 

 

 

 

 

 

----------------------------------------------------------------------------
----------------------------------------------------------------------------
--- 

Dipl.-Ing. Marion Hiller 
TRANSSOLAR Energietechnik GmbH 
Stuttgart - Munich - New York - Paris  

t:  <tel:%2B49.711.67976.27> +49.711.67976.0   f:  <tel:%2B49.711.67976.11>
+49.711.67976.11

 <http://www.transsolar.com/> www.transsolar.com/   

KlimaEngineering - Technologien für energieeffizientes Bauen und
Nutzerkomfort in Gebäuden 
Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart 

Amtsgericht Stuttgart - HRB 23347 / Steuernummer: 99073/00911 / USt-IdNr.:
DE 152272639
Geschäftsführer: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter
Schnelle 

 

 

Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im
Auftrag von Karol BANDURSKI via TRNSYS-users
Gesendet: Samstag, 17. Februar 2018 00:46
An: trnsys-users at cae.wisc.edu <mailto:trnsys-users at cae.wisc.edu> 
Cc: Karol BANDURSKI <karol.bandurski at put.poznan.pl
<mailto:karol.bandurski at put.poznan.pl> >
Betreff: [TRNSYS-users] active layer

 

Dear All

 

I model thermal active building system. My ceiling is between two zones.

When I ask TRNBuild for outlet temperature from active layer -TOFL (NType
58) - I can do it choosing upper or lower zone of the ceiling.

 

Why do I get different values for this two outputs? If I understand: they
both related to the same ceiling and the same pipes.

 

Regards,

Karol

 

--------------------------------------------------------------------

Karol BANDURSKI M. Sc.

Faculty of Civil and Environemntal Engeneering

Division of Heating, Air Conditioning and Air Protection

Poznan University of Technology

 <http://www.put.poznan.pl/~karol.bandurski> www.put.poznan.pl/~karol.
bandurski

 <https://www.researchgate.net/profile/Karol_Bandurski>
https://www.researchgate.net/profile/Karol_Bandurski

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180219/d7298547/attachment.htm>


More information about the TRNSYS-users mailing list