[TRNSYS-users] (no subject)

David BRADLEY d.bradley at tess-inc.com
Mon Dec 10 09:29:29 PST 2018

Berkane Ahlem,

   I am not clear whether you are asking about how to obtain those 
values from a simulation that you are running or how you can estimate 
those values in order to set them in a simulation that you plan to run. 
If it has to do with getting those results out of a simulation then have 
a look at Type55. It is an integrator but it can also report minimum and 
maximum values as well as average values over user-defined time periods.

kind regards,


On 12/09/2018 06:38, berkane ahlem via TRNSYS-users wrote:
> Hello sirs,
>  How can  i calculate or estimate  the yearly average ground load 
> (qy), the highest monthly ground load (qm), and the peak hourly load 
> (qh). The corresponding durations are usu-ally 10 years, one month, 
> and six hours. And effective gound thermal resistance R10y, R1m , and 
> R6h represent effective ground thermal resistances for 10 years, one 
> month, and six hours thermal pulses
> Thank you
> Best regards
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

d.bradley at tess-inc.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20181210/11f2f9b3/attachment.html>

More information about the TRNSYS-users mailing list