[TRNSYS-users] help needed regarding type99

David BRADLEY d.bradley at tess-inc.com
Mon Aug 27 07:23:02 PDT 2018


Behzad,

   I would suggest that you try Type9 instead of Type99. It can be a 
little bit tricky to set up the parameters but I have found that with 
the data file, a Type9 and a Type65 that is just plotting what the data 
reader is outputting it isn't so hard. Type9 is a bit more flexible than 
Type99 in terms of the syntax that it reads. However, if you are reading 
solar radiation data then you'll need to also include a Type16 in your 
project and pass the data read by Type9 to the Type16 solar radiation 
processor.

kind regards,

  David



On 08/27/2018 05:45, up201700037 via TRNSYS-users wrote:
> Dear users,
>
> MY name is behzad shahzamanian from university of porto and i am 
> seeking to apply weather user format-type99 in trnsys for introducing 
> weather data from my experimental work done previously. I have 
> difficuly how to use it for my case beacuse when i copy columns of 
> variables from exel file of my data to the external file of type99, 
> the simulation do not run and i receive an error for header syntax.
>
> Best regards,
> Behzad shahzamanian sichani
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com




More information about the TRNSYS-users mailing list