[TRNSYS-users] Constant cooling water temperature

[David BRADLEY]

Amaia,

   If you are using Trnsys18 the cooling tower now has internal controls 
so that it can adjust its fan speed in order to maintain a desired 
cooling water inlet temperature to the chiller.
kind regards,
  David


On 08/18/2018 03:56, Amaia Zuazua Ros via TRNSYS-users wrote:
>
> Hi TRNsys users,
>
> I'm simulating a chiller (type 666) coupled to a cooling tower (type 
> 51). I want to regulate the speed of the pump regarding the outlet 
> temperature of the cooling tower to make the chiller work at constant 
> cooling water temperature at the condenser. Is there any specific type 
> to do it?
>
> Thanks!
>
> Amaia
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180820/55adc0f4/attachment.htm>