[TRNSYS-users] Type 14 Interface Problem

[David BRADLEY]

Chris,

   I believe the problem has more to do with screen resolution than it 
does with Trnsys17 vs. 18. Unfortunately we have not got a solution for 
the problem. The workaround is to set the parameters manually in the 
proforma. If you have a very complicated forcing function then you can 
enter it into an Excel spreadsheet, save it as a *.csv file and then 
read the file using Type9.

kind regards,

  David



On 08/16/2018 11:04, Christopher McNevin via TRNSYS-users wrote:
>
> Hello,
>
>
> Has anyone had a similar problem with Type 14 forcing function in 
> TRNSYS 18? Mine has been doing this since I installed TRNSYS.
>
> The table for entering new values into the forcing function appears 
> behind the plot of values so it is not usable.
>
>
> I have attached a screen shot.
>
>
>
> Thanks,
>
>
> Chris McNevin
>
>>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180816/fb551cb0/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pastedImage.png
Type: image/png
Size: 27159 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180816/fb551cb0/attachment-0002.png>