[TRNSYS-users] How to control absorption chiller (Type 107)

Angel Carrera angel.carrera at aiguasol.coop
Tue Aug 14 05:52:50 PDT 2018


Dear Sinchote,

You can implement that control by multiplying both of your conditions in an
equation block, and use the result as your control signal. The first of
your conditions will work better if you implement it in a type 2 and the
second can came from some forcing function, hope it helps

Angel

El mar., 14 ago. 2018 10:47, Sinchote Keeratianant via TRNSYS-users <
trnsys-users at lists.onebuilding.org> escribió:

> Dear Trnsys users,
>
>       I'm studying in master degree and conducting the simulation solar
> cooling system. I have a problem about how to control the absorption
> chiller model(type 107) working.
>
> I would like to control 2 modes for absorption chiller working :
> 1. Absorption chiller working when temperature in hot water tank reach to
> 75 degree celsius and
> 2. Absorption chiller working on 9.00 a.m. - 22.00 p.m.
>
> The absorption chiller wiil work when both of conditions happen.
>
> Has anyone experienced this problem and knows how to fix it?
>
>
> Best regards,
>
>
> Sinchote
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180814/eba6de3e/attachment.htm>


More information about the TRNSYS-users mailing list