[TRNSYS-users] Type16 outputs + Type536 inputs

[Jeff Thornton]

Jose,

Type 16 does indeed output the azimuth of the collector surface.  It’s a cycled output with the number of surfaces and is in the same block with the incidence angle and collector slope.

Jeff Thornton
TESS

> On Aug 10, 2018, at 8:06 AM, José María Roca via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Hi colleagues, 
> 
> I was wondering why does the type16 doesn't have the surface azimuth as output…
> 
> On the type536 a azimuth is needed as input. In the documentation it doesn’t specify if it’s of the axis (as in type16 for tracking surfaces) or the aperture surface. For example por a parabolic through with N-S axis the surface aperture azimuth would be facing east (90º) before noon and facing west (270º) after noon. But this input must be given to the type from an equation since the type16 does’t have the surface azimuth as output. Any work around different than this one?
> 
> Best,
> José María Roca
> 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org