[TRNSYS-users] Type 94 and type 15: another one

[leen peeters]

Jeff,

is there an example with batteries. I used the type 47 Shepherd modified.
Filling on the data is no issue, but some example with inverters on that
would be good!
Just to see how they did the control modelling

me

On 29 April 2018 at 23:17, Jeff Thornton <thornton at tess-inc.com> wrote:

> Leen - yes.  Connect the incidence angle from Type 15 for the sloped
> surface to the the Type 94 input.  You should also review the example
> projects as they show weather connections for sloped surfaces.
>
> Jeff - TESS
>
> Sent from my iPhone
>
> > On Apr 29, 2018, at 3:52 PM, leen peeters via TRNSYS-users <
> trnsys-users at lists.onebuilding.org> wrote:
> >
> > Hi,
> >
> > so type 15 gives the Angle of incidence for surface (The angle of
> incidence between incident beam radiation and the specified surface.)
> > Type 94 asks the incidence angle of beam radiation (The angle between
> the normal to the array plane and the line between the sun and the surface
> of the array.)
> >
> > Maybe not needed for all, but for me it could be a bit more clear. I
> couple them?
> >
> > Leen
> > _______________________________________________
> > TRNSYS-users mailing list
> > TRNSYS-users at lists.onebuilding.org
> > http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180430/191e2b1a/attachment.htm>