[TRNSYS-users] Type 94 and Type 15

[Jeff Thornton]

Leen,

Yes.  Set the slope of the surface in Type 15 and then connect the surface outputs from 15 to the inputs of Type 94.

Jeff / TESS

Sent from my iPhone

> On Apr 29, 2018, at 3:47 PM, leen peeters via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Hi,
> 
> type 94 demands for an input for both diffuse and beam radiation on the array, while aslo asking for the slope of the panels. 
> Type 15 calculations the weather data, including on defined slopes. 
> 
> Question is now what exactly is meant with "on the array" for type 94? Does it mean I have to use the slope of the panels as a value in the type 15 too?
> 
> Just to make sure I handle it correctly ...
> 
> Leen
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org