[TRNSYS-users] simulation time error

[廖刚]

 Dear TRNSYS users,

 I met a very strange problem when I run my simulation model, I found that my model works well when the simulation time is relatively small, but when I increase the simulation stop time , it gives warning “The inputs to the listed units have not converged at this timestep “and then corrupted with an fatal error.

  I would be very appreciated if someone can help me solve this problem,

 Best

LiaoGang
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180419/24ee372d/attachment-0001.html>