[TRNSYS-users] TRNSYS - errors

[via TRNSYS-users]

Pady - 

There is an error prior to the two that you have included here and it
indicates that you have the wrong number of parameters specified for
Type60. 

Regards, 

Tim 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
22 N Carroll St, Suite 370
Madison, WI 53703
office: 608-274-2577
cell: 608-225-5250

On 2017-09-25 17:04, Padmanabhan Iyer via TRNSYS-users wrote: 

> Hi Team, 
> 
> I am getting an error message as below: 
> 
> Fatal Error at time : 1.000000
> Generated by Unit : 21
> Generated by Type : 31
> TRNSYS Message 468 : The getStaticArrayValue function was called with an index greater than that specified for the total number of dynamic variables in the SetNumberStoredVariables subroutine call. Please check the formulation of the specified TYPE, rebuild the dynamic link library and re-run the simulation.
> Reported information : Not available 
> 
> Fatal Error at time : 1.000000
> Generated by Unit : 34
> Generated by Type : 2
> TRNSYS Message 134 : The current Unit has tried to access a Output value higher than the number of outputs for the Type.
> Reported information : Not available 
> 
> I have attached the .dck file and list file for your reference. 
> 
> Any help would be much appreciated. 
> 
> Thanks, 
> Pady 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170926/1680d907/attachment-0002.htm>