[TRNSYS-users] Error while importing the IDF file

[adnan rasheed via TRNSYS-users]

Hello sanmit,

you have some problem with the floor you define in Trans3d. now simple way
is that just go to TRNBulid with this same error file you imported and this
time in TRNSBuild go in  file manu and  Export trnsys3d file and open it
again in Google sketchup's Trnsys3d. here you can see you disturbed floor
surface, correct it and save as and again import to the trnsbuild hope you
problem will resolve.


Regards
Adnan

On Sun, Sep 24, 2017 at 1:06 PM, sanmit more via TRNSYS-users <
trnsys-users at lists.onebuilding.org> wrote:

> Dear Community,
>
> I have been trying to follow the Trnsys3D manual and learn how to import
> the building modelled in Google sketchup 8 in Trnsys. After following all
> the modelling instructions as mentioned in the manual, when I tried to
> import the file, It showed me following errors asmattached. I have also
> attached the Google sketchup file (TEST2) that I made following the
> tutorial as well as its deck reader error log file. Pls help.
>
>
> --
> Sanmit Mukund More ,
> BE(hons.) Mechanical
> Msc(hons.) Physics
> BITS PILANI K.K. Birla Goa Campus
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170924/069e43f5/attachment-0001.htm>