[TRNSYS-users] modify initial building temperature Trnbuild with external program

[Eunice Herrera via TRNSYS-users]

Dear Toni,

Thank you for your answer. Actually I've just found out that indeed it is
possible. Then main file is the .b17 and is the one where changes have to
be done. Problem solved :)

Thank you.

Eunice

On 13 September 2017 at 14:27, Toni Calabrese <calabresetoni at live.com>
wrote:

> Hallo Eunice,
>
> actually I think that you can open directly in Matlab the *.B17 file and
> change whatever you want (I think also the initial temperature of the
> building).
>
> Try and let me know.
>
> Toni.
>
>
>
> *Von:* TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] *Im
> Auftrag von *Eunice Herrera via TRNSYS-users
> *Gesendet:* Mittwoch, 13. September 2017 13:32
> *An:* trnsys-users at lists.onebuilding.org
> *Betreff:* [TRNSYS-users] modify initial building temperature Trnbuild
> with external program
>
>
>
> Dear all Trnsys users,
>
>
>
> Is there possibility to modify the initial temperature of the building
> without using the TRNBuild interface?
>
>
>
> I modified it in the .inf file and then I launched the Trnsys studio but
> it didn't recognize my change in the .inf file. It only recognizes the
> value configured using the TrnBuild interface.
>
>
>
> My aim is to run the trnsys model using Matlab (reading the .dck file and
> running the trnsys kernell, which it works) but now I need to update the
> initial building temperature of Type56 which is not included of the .dck
> file, instead this parameter is located in the .inf file.
>
>
>
> I really appreciate your help.
>
>
>
> Best regards,
>
>
>
> Eunice Herrera
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170913/39dd48be/attachment.htm>